Click the above image for the gallery on flickr cause the embed options all suck. Also all images are captioned with additional information not always included below
This past Thursday the weather and our schedules cooperated to finish our travels to Buffalo. Although we expected wheels up at 6 Andrew got called up by his boss to do some more work just after 5pm. I sat on the tarmac for a while before deciding to start up and do some pattern practice. I listened to ATIS and it told me the winds were 19kts – haha WAT. Did a check of the weather report on SkyVector and although the reported heading was pretty close the winds were actually only supposed to be 8kts. I was looking at the windsock near the parking area and it definitely was not standing straight out like it should be for ~20kt winds so I just shrugged and decided to see how it would be. Took off, flew a decent pattern with a better rollout to final and landed. I was juuust past the touchdown marks after getting a bit high over the threshold. Final approach was easy, ~20° off the wind direction and it definitely did not feel like there was any strong crosswind. Checking my landing report (nice and soft, baby!) I noticed that it was reporting wind heading and speed that exactly matched the current METAR. So the sim weather was right the ATIS was wrong! Interesting…
As I was taxiing off the runway just before 6pm Andrew finally showed up so I waited for him to finish getting ready. Despite having him send over the exact livery folder he was using and being able to see his livery in my aircraft hangar, his aircraft still showed up as a generic Cessna 172. Will have to continue looking into that but no time now. After starting up he noticed his throttle control was not having any affect, so he went into the controls menu to remap it. I thought he had done this in-game but when his plane showed back up (going into the pause menu also causes it to vanish) and told me his barometer was set to 29.92 I had a feeling he had instead backed out to the main menu. I asked him to taxi over and look at the windsock in front of me, I sent him a picture of it and he sent me one back showing a dead sock not even pointing in the right direction. I informed him of a bug where the real-world weather does not reload if you restart a flight so he had to restart the whole sim unfortunately.
Flight plan is available here, this is the second leg.
Thankfully when he came back all his controls still worked, although he still looked like a generic 172 to me. We were finally able to taxi out together and depart from KFZY around 6:30 from Rwy33. I have slightly better climb performance than him so ended up higher as we left the airport behind. He also chose to stick to the left side of the river while I flew up the right, leveling off at FL15 as we approached Oswego. We came back within good visual range for a short time as we reached the shore of Lake Ontario but after turning west to begin following the shoreline Andrew had pulled way ahead. Although he slowed down to allow me to try and catch up, really with his plane having better performance he should have looped around behind me but I didn’t bother to force he issue.
Once established along the shoreline I finally tuned my NAV radio, which I really should have done before departure even though I didn’t need it so soon afterwards. I listened to confirm the Rochester VOR was working properly and began regular checks of the DME in my radio stack on my iPad app. Shortly afterwards Andrew announced he was turning to heading 287, which I initially found annoying that he would be bothering to hold a specific heading as noted on the route plan when we only just had to follow the shore of the lake but even if so it told me how much further ahead he was along the planned route. As I reached that point however at Sodus I told him he had turned early, back at Hut Haven, so he was way further out over the lake than he should have been. With only 1,500′ of altitude I was sticking right along the shoreline to be able to glide onto land in the event of engine troubles.
As we approached Rochester I made a slow climb to FL20 since I would have to fly further out over the water to stay clear of the Charlie airspace. Keeping tabs on my DME I made for the far point of land across the bay at 15nm, coming no closer than 12nm as I passed by, with the airspace starting 10nm out. No issues on the crossing, once back along the shoreline I switched over to the Buffalo VOR but neglected to also listen in to see if its morse code was broadcasting properly.
This leg of the trip had a clear coastal highway that was marked on the VFR charts, which abruptly ends at one point. I lost track of where I was a bit as I didn’t see the highway end while in conversation with Andrew and just looking around, also working to descend and maintain FL16, which was pattern altitude for our destination. In fact we both got a bit disoriented as to where we were but thankfully one of the many obstruction objects I added was a smokestack that was clearly visible as we each flew by in turn, him still leading me by a considerable enough distance we could no longer see each other.
Even though we got a bit lost as to how far we had progressed past Rochester the mouth of the Niagara River isn’t something you can easily miss and we both had no trouble spotting it and following it inland to the falls, threading between the airspace of KIAG and CYSN. Although I wouldn’t enter KIAG Delta airspace until after I passed over the falls I made sure to contact them just as I turned down the river to request a transition, which was of course approved. Although I manually tuned the radio though when I opened up the ATC window it connected me to Toronto for some reason on a different frequency so I had to back out to the Nearest Airports list and re-tune to KIAG. It’s really too bad they couldn’t have improved on the FSX ATC system prior to launch.
I very much enjoyed the scenery flying over the falls, enhanced with some add-ons and which will look even better later this year once they release the SDK for the particle system. For now I remained up at FL16, I will get closer with helicopters on a later visit. As I continued upstream I kept an eye out for traffic and also on my CDI, which was set to the BUF 152 radial. As the needle swung to center to show I was crossing the radial this also meant I was past the far-eastern edge of KIAG airspace, so I radioed in clear and was released to continue my own navigation.
Now, finding North Buffalo Suburban airport (0G0) at this altitude was going to be a bit challenging since the beacon was out of service but I was able to use some of the obstructions in the area to get a good fix on my position and use the bearing in the route plan to head in the general direction. Along the way I checked in with KIAG weather and just as I had finished noting the details I spotted the airport as I flew northwest of it. Whoops! Wrong side! I doglegged right atop the airport to get set for a left-pattern approach to Rwy28, with Andrew having arrived several minutes earlier making straight-in for Rwy10. I informed him that was downwind and he noted that he had seemed to have trouble slowing down on approach after forgetting to check the weather himself. Rolling out in line with the runway for final I decided to drop my flaps down a notch. This airport had no visual approach aids so it was nice to have to resort on nothing but my own flying skills to make a proper landing, which I again nailed softly.
You can see the whole flight with this Google Earth KMZ.
Overall the flight for me went as planned. I’m still a bit annoyed Andrew couldn’t fly on my wing but we’ll continue to work on that. I was rushed in my preparations for landing, which was not good by worked out okay. Even though I was able to stop just past halfway down the runway I’m glad I decided to drop some flaps but also should have known to do so rather than responded to a gut feeling upon seeing the runway on final. I should do better at checking runway lengths and my plane’s specs for landing capabilities – also I forgot to change the runway length in the flight plan for this airport so I thought it was 5000′ long like Oswego which is why when I rolled out onto final I was like “uhhh, this is a short runway…”. Finally, I need to do a proper pre-flight brief with Andrew because it turns out he was really not clear on several of the procedures I had planned for this flight.
Tomorrow I hope we can make the whole hop from Buffalo to Cleveland!
https://c2cmed.com/wp-content/pages/?kakie_byvayut_trenaghery_dlya_ravnovesiya_effektivnosty_zanyatiy_html=
14. Thanks for sharing your understanding below. Your creating style makes the content engaging and easy to understand. financial strategies
Low back pain after a car accident is something a lot of people brush off until it starts affecting everyday life — sitting for any stretch of time was noticeably difficult after a rear-end collision I went through near Peachtree Industrial Boulevard duluth chiropractic clinic
В этой статье рассматриваются способы преодоления зависимости и успешные истории людей, которые справились с этой проблемой. Мы обсудим важность поддержки со стороны близких и профессионалов, а также стратегии, которые могут помочь в процессе выздоровления. Научитесь первоочередным шагам к новой жизни.
Всё самое вкусное внутри – вывод из запоя на дому круглосуточно
Well done! Find more at commercial window services .
I like how this post focuses on preparation. International moving from Spokane requires a clear plan, and companies like Spokane international movers can help with the details.
I truthfully figured I was uninjured after the collision on I-285 near Camp Creek — nothing hurt right away — but within the week, the aching in my neck started building and I could no longer ignore it chiropractic clinic
I found this very interesting. Check out vinyl window replacement for more.
The imaging results confirmed nerve involvement in my lower back that I didn’t realize was there, and Arrowhead Clinic in Duluth designed a targeted treatment protocol built from what the images indicated rather than just handling symptoms generally. Dr duluth chiropractic clinic
16. Useful article. I’m sure a lot of readers will gain from the ideas you shared here. investment strategies
Being uninsured after my collision off I-285 was really stressful because I did not think I could get help. I heard through a friend that Arrowhead Clinic helps uninsured accident victims, so I # #anykeyword## called and asked about it chiropractor near me
Feel free to surf to my page – Donny
Now we have every size, stroke, turn, energy, and
dimension of Engines, Engine Parts, Starters, Mufflers &
Tuned Pipes, Crankshafts, Pistons, Heads, Headers, Bearings, Glow Plugs, and well,
just about everything you might want or need.
Feel free to visit my web blog – ห้องเชือด
Great reminder to run a spring startup movements. My listing covers flush, alignment, and application setup: sprinkler install .
Visit my site … Highstakes Sweeps
В этой статье рассматриваются различные аспекты избавления от зависимости, включая физические и психологические методы. Мы обсудим поддержку, мотивацию и стратегии, которые помогут в процессе выздоровления. Читатели узнают, как преодолеть трудности и двигаться к новой жизни без зависимости.
Нажмите, чтобы узнать больше – помощь в лечении алкоголизма
What Dr chiropractor near me
My mid-upper back flared up badly about a week after a crash on I-16 near the Pooler exit chiropractor near me
I found this helpful for understanding what goes into an office move. Having Best Tacoma movers involved can make the process much more manageable.
El esparcimiento en salas de juego online sin licencia estГЎ en auge. Muchos apostadores buscan oportunidades para disfrutar de excitaciГіn sin restricciones. casino online sin licencia http://www.kentarou.net/archives/457752 ofrece vivencias Гєnicas pero por otro lado conlleva inconvenientes importantes.
This was very insightful. Check out residential AC repair Duluth for more.
You made a good point about continuity of care if health declines. I’ll focus on communities listed on senior care that can support residents long-term.
Emotional readiness of the senior is key. We talk a lot about transition support and adjustment on senior care .
The hours following my wreck on Highway 34 around Newnan Crossing Bypass, I tried to get out of bed with painful neck tightness that prevented me to look side to side chiropractor newnan
I was completely unaware that treatment after a car accident could be available without out-of-pocket expense — I expected I would have to cover the cost myself chiropractor near me
https://potswap.club/forums/thread/29181/1xBet-Valid-Promo-Code-1XCODE300-130-Sports-Bonus
The simple act of recognizing everyone by name, staff and residents alike, builds a sense of belonging in small homes. For someone with memory loss, that belonging is crucial. This was reinforced in articles on memory care home .
Appreciate the thorough information. For more, visit AC emergency service .
I appreciate that many small assisted living homes avoid long institutional hallways and confusing layouts. It’s easier for seniors to navigate to the bathroom or dining area. elderly care points this out as a key benefit.
Great tips! For more, visit AC repair near me .
Drainage around in-flooring furnishings is simple to overlook. I followed a gravel sleeve tip I came across on landscape illumination and haven’t had water considerations in view that.
Offer advice about preparing elevators, parking, or building access before moving day. Local movers Grand Rapids
I like the practical approach in this post. Anyone planning an international move from Smithtown can use Smithtown apartment movers as an additional resource.
Appreciate the thorough analysis. For more, visit AC unit repair Irving TX .
This post offers great guidance for international relocation. Rochester City residents should look for movers who provide transparent pricing and reliable tracking. Rochester City international movers
I agree that planning early is key. Booking trusted Sioux Falls movers in advance can help avoid last-minute stress and scheduling issues. More details here: Sioux Falls apartment movers
This was very beneficial. For more, visit Japanese kitchen knife .
This is a helpful reminder that commercial moves should be handled professionally. Stamford business owners may want to explore Stamford full service movers when looking for moving support.
I always recommend comparing moving services before booking, especially when trying to save money. North Hempstead Mover’s may be useful for people looking for affordable movers near New Hyde Park.
The idea of evaluating staff patience and empathy during the tour is a great tip. I’ll observe closely when I visit memory care centers from my assisted living list.
I appreciate the tips about preparing a vehicle before transport. For those searching for Lubbock car transportation services, Lubbock auto shippers could be a useful resource.
I appreciated this article. For more, visit affordable window services .
The distinction between personal independence in assisted living and increased support in memory care is something families often underestimate memory care home
Great suggestion to observe resident-staff interactions during a tour. I’ll direct readers to think about that on senior care .
Your explanation of when behavioral symptoms overwhelm assisted living staffing is very realistic. Families can see real-world examples in stories we share on dementia care .
Thanks for citing timers and photocells. I incorporated a sensible agenda and tuned brightness zones following a walkthrough on outdoor illumination .
Office relocation can be stressful, but having the right moving team makes everything more manageable. Businesses looking for Allentown commercial movers may find Allentown international movers helpful.
This was a great help. Check out affordable kitchen knife for more.
Wonderful tips! Find more at budget window replacement .
I found this topic very relevant. If you’re relocating from Spokane overseas, it’s important to work with movers who understand customs and shipping timelines. Best Spokane movers