Click the above image for the gallery on flickr cause the embed options all suck. Also all images are captioned with additional information not always included below
This past Thursday the weather and our schedules cooperated to finish our travels to Buffalo. Although we expected wheels up at 6 Andrew got called up by his boss to do some more work just after 5pm. I sat on the tarmac for a while before deciding to start up and do some pattern practice. I listened to ATIS and it told me the winds were 19kts – haha WAT. Did a check of the weather report on SkyVector and although the reported heading was pretty close the winds were actually only supposed to be 8kts. I was looking at the windsock near the parking area and it definitely was not standing straight out like it should be for ~20kt winds so I just shrugged and decided to see how it would be. Took off, flew a decent pattern with a better rollout to final and landed. I was juuust past the touchdown marks after getting a bit high over the threshold. Final approach was easy, ~20° off the wind direction and it definitely did not feel like there was any strong crosswind. Checking my landing report (nice and soft, baby!) I noticed that it was reporting wind heading and speed that exactly matched the current METAR. So the sim weather was right the ATIS was wrong! Interesting…
As I was taxiing off the runway just before 6pm Andrew finally showed up so I waited for him to finish getting ready. Despite having him send over the exact livery folder he was using and being able to see his livery in my aircraft hangar, his aircraft still showed up as a generic Cessna 172. Will have to continue looking into that but no time now. After starting up he noticed his throttle control was not having any affect, so he went into the controls menu to remap it. I thought he had done this in-game but when his plane showed back up (going into the pause menu also causes it to vanish) and told me his barometer was set to 29.92 I had a feeling he had instead backed out to the main menu. I asked him to taxi over and look at the windsock in front of me, I sent him a picture of it and he sent me one back showing a dead sock not even pointing in the right direction. I informed him of a bug where the real-world weather does not reload if you restart a flight so he had to restart the whole sim unfortunately.
Flight plan is available here, this is the second leg.
Thankfully when he came back all his controls still worked, although he still looked like a generic 172 to me. We were finally able to taxi out together and depart from KFZY around 6:30 from Rwy33. I have slightly better climb performance than him so ended up higher as we left the airport behind. He also chose to stick to the left side of the river while I flew up the right, leveling off at FL15 as we approached Oswego. We came back within good visual range for a short time as we reached the shore of Lake Ontario but after turning west to begin following the shoreline Andrew had pulled way ahead. Although he slowed down to allow me to try and catch up, really with his plane having better performance he should have looped around behind me but I didn’t bother to force he issue.
Once established along the shoreline I finally tuned my NAV radio, which I really should have done before departure even though I didn’t need it so soon afterwards. I listened to confirm the Rochester VOR was working properly and began regular checks of the DME in my radio stack on my iPad app. Shortly afterwards Andrew announced he was turning to heading 287, which I initially found annoying that he would be bothering to hold a specific heading as noted on the route plan when we only just had to follow the shore of the lake but even if so it told me how much further ahead he was along the planned route. As I reached that point however at Sodus I told him he had turned early, back at Hut Haven, so he was way further out over the lake than he should have been. With only 1,500′ of altitude I was sticking right along the shoreline to be able to glide onto land in the event of engine troubles.
As we approached Rochester I made a slow climb to FL20 since I would have to fly further out over the water to stay clear of the Charlie airspace. Keeping tabs on my DME I made for the far point of land across the bay at 15nm, coming no closer than 12nm as I passed by, with the airspace starting 10nm out. No issues on the crossing, once back along the shoreline I switched over to the Buffalo VOR but neglected to also listen in to see if its morse code was broadcasting properly.
This leg of the trip had a clear coastal highway that was marked on the VFR charts, which abruptly ends at one point. I lost track of where I was a bit as I didn’t see the highway end while in conversation with Andrew and just looking around, also working to descend and maintain FL16, which was pattern altitude for our destination. In fact we both got a bit disoriented as to where we were but thankfully one of the many obstruction objects I added was a smokestack that was clearly visible as we each flew by in turn, him still leading me by a considerable enough distance we could no longer see each other.
Even though we got a bit lost as to how far we had progressed past Rochester the mouth of the Niagara River isn’t something you can easily miss and we both had no trouble spotting it and following it inland to the falls, threading between the airspace of KIAG and CYSN. Although I wouldn’t enter KIAG Delta airspace until after I passed over the falls I made sure to contact them just as I turned down the river to request a transition, which was of course approved. Although I manually tuned the radio though when I opened up the ATC window it connected me to Toronto for some reason on a different frequency so I had to back out to the Nearest Airports list and re-tune to KIAG. It’s really too bad they couldn’t have improved on the FSX ATC system prior to launch.
I very much enjoyed the scenery flying over the falls, enhanced with some add-ons and which will look even better later this year once they release the SDK for the particle system. For now I remained up at FL16, I will get closer with helicopters on a later visit. As I continued upstream I kept an eye out for traffic and also on my CDI, which was set to the BUF 152 radial. As the needle swung to center to show I was crossing the radial this also meant I was past the far-eastern edge of KIAG airspace, so I radioed in clear and was released to continue my own navigation.
Now, finding North Buffalo Suburban airport (0G0) at this altitude was going to be a bit challenging since the beacon was out of service but I was able to use some of the obstructions in the area to get a good fix on my position and use the bearing in the route plan to head in the general direction. Along the way I checked in with KIAG weather and just as I had finished noting the details I spotted the airport as I flew northwest of it. Whoops! Wrong side! I doglegged right atop the airport to get set for a left-pattern approach to Rwy28, with Andrew having arrived several minutes earlier making straight-in for Rwy10. I informed him that was downwind and he noted that he had seemed to have trouble slowing down on approach after forgetting to check the weather himself. Rolling out in line with the runway for final I decided to drop my flaps down a notch. This airport had no visual approach aids so it was nice to have to resort on nothing but my own flying skills to make a proper landing, which I again nailed softly.
You can see the whole flight with this Google Earth KMZ.
Overall the flight for me went as planned. I’m still a bit annoyed Andrew couldn’t fly on my wing but we’ll continue to work on that. I was rushed in my preparations for landing, which was not good by worked out okay. Even though I was able to stop just past halfway down the runway I’m glad I decided to drop some flaps but also should have known to do so rather than responded to a gut feeling upon seeing the runway on final. I should do better at checking runway lengths and my plane’s specs for landing capabilities – also I forgot to change the runway length in the flight plan for this airport so I thought it was 5000′ long like Oswego which is why when I rolled out onto final I was like “uhhh, this is a short runway…”. Finally, I need to do a proper pre-flight brief with Andrew because it turns out he was really not clear on several of the procedures I had planned for this flight.
Tomorrow I hope we can make the whole hop from Buffalo to Cleveland!
Thanks for the clear breakdown. Find more at precios de contadores Saltillo .
Have you ever thought about adding a little bit more than just your articles?
I mean, what you say is fundamental and everything.
Nevertheless think of if you added some great photos or videos to give your
posts more, “pop”! Your content is excellent but with pics and video clips,
this site could definitely be one of the most beneficial in its field.
Awesome blog!
Вывод из запоя на дому в Екатеринбурге — это услуга которая позволяет пациентам пройти лечение в удобных для них условиях без необходимости посещать стационар. Процедура включает несколько этапов каждый из которых направлен на снижение уровня алкогольной интоксикации и стабилизацию состояния пациента. Главным преимуществом вывода из запоя на дому является то что это не только удобно но и позволяет избежать лишнего стресса который может быть вызван госпитализацией. Получить больше информации – вывод из запоя на дому круглосуточно в екатеринбурге
Do Paterson shippers via Paterson car shippers provide photo condition reports at pickup and delivery?
I switched to a communicating system— residential hvac installation set it up and explained the data it tracks.
скачать видио с ютуб скачать видио с ютуб
Super helpful CPC vs. CPA analysis for Meta Ads. I’ve been shifting budgets based on MER instead of channel-only ROAS and it’s working well. Full notes at paid advertising consultants
If you’re relocating from Duluth’s hillside neighborhoods, secure driveway access— discount movers Duluth helped with cones and permits.
За выездом врача чаще обращаются тогда когда человеку тяжело добраться до клиники он ослаблен после нескольких дней употребления алкоголя или родственникам важно быстрее понять какая тактика будет безопасной. После осмотра можно определить нужна ли капельница достаточно ли детоксикации на дому требуется ли повторное наблюдение а в дальнейшем — консультация по лечению алкоголизма кодирование или реабилитация. В части случаев уже первый звонок позволяет понять идет ли речь только о временном ухудшении самочувствия или о состоянии при котором может потребоваться вывод из запоя в стационаре. Ознакомиться с деталями – вызвать нарколога на дом в екатеринбурге
For careful piano moving around Suwanee, I’d contact the specialists listed on Suwanee Mover’s .
This guide on ductwork leaks was eye-opening. We got ours sealed after a consult from licensed ac heating and cooling technicians .
This write-up offers clear support for finding Nasha Mukti Kendra in Noida. Nasha Mukti Kendra in Noida
I’m not sure exactly why but this weblog is loading extremely
slow for me. Is anyone else having this problem or is it a problem on my end?
I’ll check back later and see if the problem still exists.
For seniors relocating to be near family in another state find patient white glove movers at Local movers Jacksonville
The moving inventory template plus Virginia Beach Mover’s ’s quotes kept my VA Beach move on budget.
For balanced lean gains, Melbourne PTs at personal trainer for beginners customise volume and intensity.
Adding a hot tub? Get a permit and a licensed installer—booked on Lowell, MA electrical services Lowell .
For white-glove service in Covington, browse options on Covington moving company .
Нарколог на дом в Екатеринбурге — это формат помощи который рассматривают при состояниях после употребления алкоголя когда больному требуется врачебный осмотр без поездки в клинику. Обычно речь идет о запое выраженном похмельном синдроме нарушении сна обезвоживании слабости треморе тревоге скачках давления сердцебиении и общем ухудшении самочувствия. Дальнейшая тактика зависит от состояния больного на момент осмотра длительности употребления алкоголя и наличия сопутствующих заболеваний. Разобраться лучше – https://narkolog-na-dom-ekaterinburg.ru/
Как поясняет нарколог Дмитрий Кузнецов: “Реабилитация алкоголиков должна быть многогранной. Только при сочетании медицинских и психологических методов, а также поддержке со стороны специалистов на всех этапах лечения, можно добиться устойчивого результата. Психологическая работа с пациентом помогает ему не только преодолеть зависимость, но и восстановить нормальное функционирование в обществе.” Также стоит отметить, что в некоторых случаях помощь может быть предоставлена бесплатно, и пациент может получить доступ к данным о возможных вариантах бесплатной реабилитации, что значительно облегчает процесс выздоровления.
Разобраться лучше – http://reabilitacziya-alkogolikov-moskva-1.ru
Skilled locksmiths, innovative equipment, and honest costs — locksmith .
Great article—if anyone needs a reliable electrician, commercial electrician in Fort Worth has been excellent for us.
Asking questions are really good thing if you are not understanding something completely, except this post provides pleasant understanding even.
For accurate long-distance inventory lists from Johns Creek, the template on Cheap movers Johns Creek is clutch.
I wanted a quick locksmith service in Orlando, Florida and observed swift guide by locksmith — surprisingly propose for emergency lockouts.
The content matched industry requirements—Joondalup listing found on emergency first aid Joondalup .
What’s a fair per-mile rate from Paterson to Atlanta right now? Got multiple bids from Paterson car moving companies .
Helpful guidance related to Nasha Mukti Kendra in Noida. Nasha Mukti Kendra in Noida
New workshop? electrical services in Silver Spring ran subpanel and 240V circuits for my tools.
If you’re moving after graduation, check student discounts posted on Fast Lynchburg Mover’s .
Useful knowledge related to Rehabilitation Centre in Noida. Rehabilitation Centre in Noida
Great kitchen circuit planning advice. We upgraded small appliance circuits via emergency electrical services .
Anyone else negotiate a price match? I did after showing a competitor’s quote I pulled from Office moving companies Suwanee .
Tripped breaker won’t hold— affordable Sydney emergency electrician traced a nail through a cable.
Appreciate the knob-and-tube retrofit guide. We used electrician in Overland Park Overland Park, KS to locate a specialist.
Thanks for addressing appliance freon issues. Sydney NSW junk removal handled it by the book.
Train outdoors in Princes Park with a Melbourne coach from experienced Melbourne personal trainer .
We did a hybrid move: we packed, they loaded—found through Virginia Beach moving companies in Virginia Beach.
Condo move with elevator restrictions—anyone use Local movers Jacksonville to find movers who handle HOA rules?
Heat from loose terminations is real; thermal scan case study at commercial electrical installer Houston .
We coordinated surplus furniture donation during our Covington office move thanks to Cheap movers Covington resources.
Surge protection for sensitive electronics is worth it. urgent electrician Frisco installed a panel-mounted protector.
Nice callout about driveway slope. I’ve flagged that in the notes when booking with roll off dumpster rental services .
Useful points are included here about Rehabilitation Centre in Noida. Rehabilitation Centre in Noida
The lawn renovation timeline is practical. Scheduling with local landscape contractor Charlotte this month.
Planning a weekend office move in Lilburn? We found flexible scheduling through Lilburn Mover’s .
For first timers, Joondalup courses on HLTAID001 course Joondalup are very approachable.
Learned a lot about thermal expansion tanks; installation handled by licensed Irving plumber .
Your lawn care pointers reduced ticks for us. I matched them with advice from best pest control .
Hey there! This is kind of off topic but I need some
advice from an established blog. Is it difficult to set up your own blog?
I’m not very techincal but I can figure things out pretty fast.
I’m thinking about making my own but I’m
not sure where to begin. Do you have any points
or suggestions? Thank you